Description
Baileigh SBR-3020 3 in 1 Combination machine
Slip roll on top. Press brake in the middle. Shear on the bottom. This 3-in-1 combo machine saves space. The Baileigh SBR-3020 Shear Brake Roll is a great choice for small shops with low production runs and one-off projects. Adjust the camber of the tooling to keep pressure in the middle for a consistent bend across the full width. On the shear portion, a spring-loaded hold-down helps reduce burr on the cut and prevent waste. Hardened and reversible blades stay sharp for longer. Turn the handles 360° to get one full cycle from the slip roll, press brake, or shear.
*Recommended for: Hobbyists, maintenance, and R&D shops.
Looking for a wider shear brake roll? This machine is also available in a 40″-wide version.
Features
- 30″ working width for manual shear, press brake, and roll.
- Maximum capacity of 20-gauge mild steel and 16-gauge aluminum for all functions.
- Slip roll features three wire grooves.
- Forms rolls down to 1.54″ in diameter.
- Vertical press brake portion bends up to 90°, so you can make perfect corners.
- Press brake portion includes a V die set with corresponding punch die on top to make a 90° bend.
- Movable fingers on the top beam, ranging from 1″ to 10-1/8″, can make many box sizes.
- Large handles with grips on both sides allow two operators to combine their force and make the machine easier to use.
- Manual back gauge lets you make repeatable parts without difficulty.
- Thick steel construction, weighing 340 lbs., gives the machine structural strength and maintains accuracy.
Specifications
| Model Number | SBR-3020 |
| Rolling Capacity (Gauge) | 20 ga. (.036”) |
| Shear Capacity (Gauge) | 20 ga. (.036”) |
| Weight (Lbs.) | 340 |
*Specifications subject to change without notice.
WARNING: California Prop 65
