Description
Baileigh TN-400 abrasive notcher
The TN-400 abrasive tube notcher uses a self-centering vise to guarantee the right belt positioning every time. This machine will help you perfectly cope thin wall tubing.
Features
- Made in the USA.
- 3 hp motor runs on 220-volt single-phase power.
- Ideal for coping the ends of .75” OD to 2” OD tubing or pipe.
- Notches at almost any angle up to 60°.
- 79” x 4” belt spins at a speed of 5420 feet per minute.
- V-block design of the vise jaws keeps the tube or pipe centered with the notching spindle and holds it securely.
- Vise carriage rides on a smooth Thompson shaft assembly during the notching cycle.
- Pivoted control lever presses the material press into the belt.
- Quick-change tooling system allows you to swap out the mandrel in seconds.
- Comes standard with 1.25” pipe mandrel.
Specifications
| Model Number | TN-400 |
| Belt Speed (FPM) | 5420 |
| Motor (HP) | 3 hp |
| Notch Capacity (in./OD) | .75″ – 2″ |
| Volts | 220 |
| Weight (Lbs.) | 480 |
*Specifications subject to change without notice.
WARNING: California Prop 65
Downloads
Manual
