Description
Baileigh DP-1250VS drill press
Built to last for years, the DP-1250VS floor drill press draws strength from its sturdy base and column that won’t flinch during the heaviest drilling sessions. With a 20.8” swing, this variable-speed drill press will prove an ideal investment for any machinist or fabricator.
Features
- 2 hp motor runs on just 220 volts of single-phase power.
- Tackles a maximum drilling capacity of 1.25” mild steel.
- Heavy duty spindle transfers power to the 4 Morse taper tooling.
- Speed Potentiometer dial controls powerful inverter-driven head
- Variable drilling speed, ranging from 85 to 2000 rpm, lets you choose the right setting to suit your application.
- Digital readout displays actual spindle rpm, ensuring precise results time after time.
- Features an auto-reversing tap function with up to .75” capacity.
- Wide column provides extra support and rigidity to reduce flexing even during the toughest drilling sessions.
- Base and 22” x 18.5” table are made of a heavy iron casting to increase rigidity with very large .625″ T-slots which let a vise or fixture securely hold your material.
- Coolant system, stored in the base, sprays out at the end of the spindle behind the splash and safety guard to extend drill bit and tap lifespan.
Specifications
| Model Number | DP-1250VS |
| Base Dimensions (In.) | 27″ x 19″ |
| Column Diameter (In.) | 4.52″ |
| Drilling Capacity (In.) | 1.25 |
| Input Power | 220V / 1-phase |
| Quill Diameter (In.) | 2.95″ |
| Shipping Dimensions (L x W x H) (In.) | 60 x 44 x 79 |
| Table Slots (In.) | .625″ |
| Max. Spindle Speed | 245 – 2000 rpm |
| Min. Spindle Speed | 85 – 540 rpm |
| Weight (Lbs.) | 865 |
*Specifications subject to change without notice.
WARNING: California Prop 65
