Description
Stahlwille 721QR Quick Standard MANOSKOP Torque Wrench with permanently installed 1/2″ drive QuickRelease ratchet, 40-200 Nm
Triggering
Quick setting
Double stop signal
Dual scale Nm/ft-lb
No resetting to “0” is required, as the measuring element is only loaded during the tightening process
Any force applied to the tool after the ‘click’ or applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw – does not act on the trigger mechanism and cannot cause damage to it
Protection of all sensitive parts by the robust tubular steel housing
Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Calibration adjustment without dismantling
Display deviation ” 4%
Adjustable in 5 Nm/5 ft-lb increments
